Newbie Guide

Here we take a piece of data as an example to show you the whole process from images to model.

1 Download & Installation

Login to the official website www.get3d.ai, go to the download page to download the software executable program Get3D Mapper.exe, as well as the demo data. Under Windows operating system, double-click the program to load it and install it automatically. After the installation is completed, a shortcut with the software icon will be displayed on the Windows desktop, and you can open the software by double-clicking it.

Download

2 License Acquisition

After entering the Get3D Mapper software interface for the first time, you need to obtain a license to use the software for modeling.

There are two ways to obtain license: the Official License and the Trial License. The Official License can be activated in two ways: account login mode and license document mode.

License Center

Note: Once the license activated, it can't be transferred to other computer. The license is bound to machine.

2.1 Trial License

Trial license requires an account, if you don't have an account, you can go to the official website to register first. By default, one account can be bound to one machine for trial license.

Get3D Mapper trial license supports unlimited project creation within 30 days, and a single project can import 5,000 images.

Trial License

2.2 Official License

The Official License needs to be purchased from the official website, and Get3D Mapper supports monthly, yearly and perpetual payment.

Once the purchase is complete, log in to your account in the software interface and the available licenses under your current account will be displayed.

Select the available license to activate, the activated license will show the expiry time, all the functions can be used during the period, and more than 100,000 images can be imported for modeling at one time.

Get3D Account

Login Get3D account, you can get all the historical license information about Get3D Mapper software under that account. The available license information includes the license ID, the activation status of the ID, the valid of the license period, and the expiration date. The above information is expanded as a list, and the licenses that are already bound to the machine are placed at the top of the list. Select available license to activate.

Get3D Account Mode
Login
Activate License

License Document Mode

The other way to activate the official licence applies when the PC is offline.

Firstly, export the machine code, and then in the personal account centre on the web side, input the machine code to get the license file. Import the license file to the software and click Activate to complete the binding of machine code and license.

Get3D Website
Personal Center
Obtain License

Activated license information can be viewed in License Center.

Tutorial video: https://youtu.be/fiCy3MCq2n4?si=Tq-2nDW4TAGr3t-S

2.3 License Information Management

For users who have already purchased the official version of the license, you can go to the official website personal center to view the complete license information and purchase history orders.

3 Create Project & Open Project

When use the software for the first time, click New Project to generate a project folder containing .m3d project files. When you open the project later, you can double click the .m3d file directly.

Create New Project
Open Project

4 Import Image

In the Data Manage page where you can import data, click Add Photos to open the Import Photo Pose Setting window.

Add Photos

Click Add Aerial Photos to import the data folder into the software.

Select Folder

After importing, the interface before positioning is as follows:

Photos Imported

5 Photo Positioning

There are two ways to position imported images.

5.1 EXIF positioning

Select the photo group that Exif Information exist, right-click and select Read Exif to give photos position.

Read EXIF

If successful, Photos with Pose value will change to green. The interface after successful positioning is as follows:

Positioning Successfully

Click "OK" finish importing and positioning photos.

After Positioning

5.2 Pose File Positioning

The second way of positioning is based on the pose file. Select the photo group, right click and choose pose file positioning, import pose file.

Select Pose File

For the photos after importing the pose file, select any group and the pose setting screen will appear below.

Select the correct Spatial Reference System to correspond each column of data to its coordinate system units.

Then click Apply to Photo Group.

Set Parameters

Select the group to correspond to and click OK.

Correspond to Photo Group

If successful, the following window appears.

Apply Successfully

Click OK to complete the photo import and positioning.

After Positioning

Tutorial video: https://youtu.be/1oA6RwfNr54?si=kHVPP4TisYzzvJZ6

6 Job Queue & Engine Setting

When the photo positioning is finished, click Apply in the bottom right corner to save the block.

Data Manage Interface

Click Setting on the top menu bar to open the Job and Engine Setting window.

Setting

Set the job queue directory for project and click Apply.

Job Queue Setting

Set the job queue directory for engine and set cache directory, click Apply.

Engine Setting

After applying the paths, click Start Local Engine to open the Engine screen.

Start Local Engine

Job queue directory setup is optional. For first time users, you can directly Start Local Engine.

The engine status is Waiting when no jobs have been submitted. Engine specific information can be viewed in the Engine window.

Engine Status

7 Aerial Triangulation

Once the Engine Setting is complete, you can click Submit AT. If you do not fill in the sensor parameters and focal length information, a prompt box will pop up, select Fill to fill in the camera information.

Submit AT

Fill in the correct sensor parameters and focal length information according to the camera model.

Note there is a difference between the focal length of the lower view lens and the focal length of the side view lens, please fill in correctly.

Set Camera Parameters

Once the camera information is filled in, continue back to the General view and click Submit AT to open the AT Settings window, click Submit.

Submit AT

Aerial Triangulation is submitted, calculations pending...

AT Running

At the end of Aerial Triangulation, the generated point cloud model can be viewed in the 3D view

Block 3D View

Tutorial video: https://youtu.be/dEJZR1Qh178?si=mFj2IvCOIZVV6ved

8 Reconstruction

8.1 3D Reconstruction

For blocks that have completed Aerial Triangulation calculations, right-click block and select New 3D Reconstruction or click the New 3D Reconstruction in the right bottom side to enter the Reconstruction screen.

Create New 3D Reconstruction

In the Reconstruction Settings screen, you can perform operations such as selecting Coordinate System and setting the width of each modeling’s tile.

Set Reconstruction Parameters

By clicking Submit Production, you can select the type of production you want to output. Get3D Mapper supports many types of production output.

Select Product Type

Click on Select Tiles to selectively model parts of the entire interior of the area.

Select Tiles

After all the settings are done, you can click OK to submit the production and enter the reconstruction calculation.

Production Running

After modeling, you can click 3D View to view the modeling effect within the Mapper software interface.

Model 3D VIew

You can also choose to view the product and link Get3D Viewer software with one click to view the model.

Link Get3D Viewer

Tutorial video: https://youtu.be/-Sgab5bIqT4?si=XXdSR_1r_X54wXcK

8.2 2D Reconstruction

Right-click block and select New 2D Reconstruction or click the New 2D Reconstruction in the right bottom side to enter the Reconstruction screen.

Create New 2D Reconstruction

In the Reconstruction Settings screen, you can perform operations such as selecting Coordinate System and setting the width of each modeling’s tile.

Set Reconstruction Parameters

By clicking Submit Production, you can select the type of 2D production you want to output. DOM and DSM product are supported in 2D reconstruction. Set the resolution for DOM/DSM.

Select Product Type

Click on Select Grids to selectively model parts of the entire interior of the area.

Select Grids

After all the settings are done, you can click OK to submit the production and enter the reconstruction calculation.

Production Running

Last updated