> For the complete documentation index, see [llms.txt](https://docs.get3d.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.get3d.ai/user-help-center/get3d-reaction/beginners-guide/3-.1-real-time-modeling/3.1.1-project-configuration/3-new-project-setting.md).

# 3 New project setting

While using DJI Pilot for flight planning, open the Get3d Reaction software on your laptop and create a new real-time modeling project.

Note: Software authorization is required for the first-time use of the software. For detailed instructions, please refer to section 2.5.

Launch the software, select the real-time modeling project type, and proceed to the new project settings.

<figure><img src="/files/hxVWBEqXYmoCWe60jNgT" alt=""><figcaption></figcaption></figure>

Set the project name and project path, and check the desired real-time modeling outputs (it is recommended to check both DOM output and 3D model output). Click "OK" to complete the creation project.

<figure><img src="/files/HXrp5e3Obj6hi2rn3Slq" alt=""><figcaption></figcaption></figure>